{"product_id":"muc-off-puncture-pouch-140ml","title":"Muc-Off No Puncture Hassle Tubeless Sealant Pouch 140ml - Ultimate MTB and Road Bike Protection","description":"\u003cp\u003eNo Puncture Hassle Tubeless Sealant performs under the most brutal race conditions. The cutting-edge molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. Our formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels\/tyres, No Puncture Hassle Tubeless Sealant works from 15psi-80 psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top-ups on the go!\u003c\/p\u003e\n\n\u003cp\u003eKeep out of reach of children. Dispose of contents\/container in accordance with local regulations. Avoid contact with eyes. Do not drink!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\nFor Downhill\/Enduro\/MTB\u003cbr\u003e\nSeals tears and holes up to 6mm\u003cbr\u003e\nSeals porous tyres and bead\/rim gaps\u003cbr\u003e\nLasts up to 6+ months in temperate climates* and won't ball up\u003cbr\u003e\nContains cutting-edge molecules to fill large holes and tears\u003cbr\u003e\nIncludes unique UV detection system that highlights any punctures\u003cbr\u003e\nNon-corrosive and easy to wash off with water\u003cbr\u003e\nAmmonia free\u003cbr\u003e\nCO2 compatible\u003cbr\u003e\nMinimum amount per tyre: (add up to 30ml extra for increased protection)\u003c\/p\u003e\n\n\u003cp\u003e26\" MTB \u0026amp; 27.5\": 60-75ml (4 to 5 scoops)\u003cbr\u003e\nCross 700c: 60-75ml (4 to 5 scoops)\u003cbr\u003e\n29\" MTB: 105ml-140ml (7 or the whole pouch)\u003cbr\u003e\nDownhill: 120-140ml (8 or the whole pouch)\u003cbr\u003e\n*If using in extreme heat (+35°C) simply top up if needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003cbr\u003e\nRemove all old rim strip or tape and clean rim.\u003cbr\u003e\nMake sure the rim is clean and dry before applying tape.\u003cbr\u003e\nGet the tape from the packet and line it up from the opposite side of the valve.\u003cbr\u003e\nStart by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.\u003cbr\u003e\nContinue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.\u003cbr\u003e\nContinue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)\u003cbr\u003e\nOverlap the tape by roughly 10 – 15cm\u003cbr\u003e\nLeave a small amount unstuck so that you can cut the remainder off\u003cbr\u003e\nOnce cut sketch and pull the tape down to create a seal\u003cbr\u003e\nGo around the rim with your thumb to make sure there is no air pockets or messed areas.\u003cbr\u003e\nOnce your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve\u003cbr\u003e\nGrab your tubeless valve and remove the lock ring and o ring\u003cbr\u003e\nChose the right rubber fitment for your rim tape and insert valve into rim\u003cbr\u003e\nRefit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)\u003cbr\u003e\nRe-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)\u003cbr\u003e\nInflate tyre to create a fit (should hear some popping around the rim)\u003cbr\u003e\nRelease Air and remove valve core using the spare valve cap\u003cbr\u003e\nGrab the sealant pouch and give it a shake\u003cbr\u003e\nUnscrew the cap and fit on the valve in a up right position\u003cbr\u003e\nWhile holding the pouch spin the wheel downward so that the pouch is now upside down\u003cbr\u003e\nInsert the sealant by rolling the pouch down\u003cbr\u003e\nSpin wheel back up right and remove pouch\u003cbr\u003e\nReinsert valve core and inflate to your pressure\u003cbr\u003e\nWhen filling sealant into brand-new tyres, we recommend degreasing the inside surface of the tyre to remove any oils or mould-release agents\/residues from when the tyre was manufactured. For the best results use our Quick Drying\u003c\/p\u003e\n\n\u003cp\u003eDegreaser, Disc Brake Cleaner or Glue and Sealant Remover, along with a clean cloth for effective cleaning. This process ensures maximum adhesion and effectiveness of the sealant.\u003c\/p\u003e\n","brand":"Clarkes of Cavan","offers":[{"title":"Default Title","offer_id":57838995734853,"sku":"BI-MUC160","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/9529\/8629\/files\/140mlmtbsealant850x850cropcenter69472.webp?v=1777650813","url":"https:\/\/clarkesofcavan.ie\/products\/muc-off-puncture-pouch-140ml","provider":"Clarkes of Cavan","version":"1.0","type":"link"}